AL3076 Complete Tune Up Kit Fits John Deere 50 530 60 630 70 720 730 B
AL3076 Complete Tune Up Kit Fits John Deere 50 530 60 630 70 720 730 B
AIC Replacement Parts
**TO VIEW PRICE**
LOGIN or REGISTER
Aftermarket Complete Tune Up KitTech Info:
-Kit Contains:
-(1) Spark Plug Wiring Set
-90 Degree Boots
-Wires Are Approximately 32" and 49" Long
-Copper Core
-Aluminum Coating to Prevent Corrosion
-Neoprene Outer Cover
-Each Spark Plug Wire Has One End Pre-Assembled - Crimp the Other End With a Crimping Tool
-Coil Wire is the Excess Wire Left Over From the Spark Plug Wire
-
-(1) Distributor Cap
-Dim A (1) 2 Cyl. Vertical
-Dim B (2) Clip Type
-
-(1) Tune-Up Kit
-Contains: Breaker Points, Condenser, and Rotor.
-
-Replaces Part Number: ATK1DCR
-
-(2) Spark Plugs
-7/8" - 18 Thread Diameter
-5/8" Reach
-15/16" Hex
-Cold Heat Range
-Standard Tip / Non-Resistor
-
-Replaces Part Number: AL3076Fits John Deere:
Tractor Models: 50, 60, 70, 530, 630, 720, 730, B
Replaces Part Number(s): ATK1DCR, AL3076
-Kit Contains:
-(1) Spark Plug Wiring Set
-90 Degree Boots
-Wires Are Approximately 32" and 49" Long
-Copper Core
-Aluminum Coating to Prevent Corrosion
-Neoprene Outer Cover
-Each Spark Plug Wire Has One End Pre-Assembled - Crimp the Other End With a Crimping Tool
-Coil Wire is the Excess Wire Left Over From the Spark Plug Wire
-
-(1) Distributor Cap
-Dim A (1) 2 Cyl. Vertical
-Dim B (2) Clip Type
-
-(1) Tune-Up Kit
-Contains: Breaker Points, Condenser, and Rotor.
-
-Replaces Part Number: ATK1DCR
-
-(2) Spark Plugs
-7/8" - 18 Thread Diameter
-5/8" Reach
-15/16" Hex
-Cold Heat Range
-Standard Tip / Non-Resistor
-
-Replaces Part Number: AL3076Fits John Deere:
Tractor Models: 50, 60, 70, 530, 630, 720, 730, B
Replaces Part Number(s): ATK1DCR, AL3076
Models This Part Fits:
720, 60, 730, 50, B, 70, 630, 530Additional Information:
Kit Contains: (1) Spark Plug Wiring Set 90 Degree Boots Wires Are Approximately 32" and 49" Long Copper Core Aluminum Coating to Prevent Corrosion Neoprene Outer Cover Each Spark Plug Wire Has One End Pre-Assembled - Crimp the Other End With a Crimping Tool Coil Wire is the Excess Wire Left Over From the Spark Plug Wire (1) Distributor Cap Dim A (1) 2 Cyl. Vertical Dim B (2) Clip Type Replaces Part Numbers: ATK1DCR, AL3076 (1) Tune-Up Kit Contains: Breaker Points, Condenser, and Rotor. Replaces Part Number: ATK1DCR (2) Spark Plugs 7/8" - 18 Thread Diameter 5/8" Reach 15/16" Hex Cold Heat Range Standard Tip / Non-Resistor Replaces Part Number: AL3076 Complete Tune Up KitReference Numbers:
ATK1DCR, AL3076Makes This Part Fits:
Product Category:
Product Group:
Product Sub Group:
View full details
