One New Aftermarket Replacement Brake Wheel Slave Cylinder for Case / Case IH Backhoes, Crawlers, and Tractors

This brake wheel slave cylinder is a direct replacement for the hydraulic brake actuation system used on Case backhoe loaders, crawler dozers, crawler loaders, and Case IH large-frame tractors. It fits the brake caliper assembly and actuates wheel braking when hydraulic pressure is applied from the master cylinder. IMPORTANT: This cylinder is designed for DOT-approved brake fluid ONLY. Do NOT use hydraulic oil or mineral oil -- damage caused by incorrect fluid voids all compatibility and will result in seal failure. Note: This cylinder does NOT include brake line plug (Case part 222-1062) -- reuse your existing plug or source separately.

Specifications

• Bore Diameter: 7/8"
• Rod Length: 2-3/4"
• Mounting Hole Center-to-Center: 1-3/4"
• Mounting Hole Diameter: 1/4"
• Fluid Type: DOT-approved brake fluid ONLY

Compatible Models

Case Backhoe Loaders: 580, 580B, 580C, 580D (less turbo), 480, 480B, 480C, 480D

Case Construction & Industrial: 450, 450B, 450C, 560, 575, 592, 595

Case Crawler Dozers / Crawler Loaders: 850B, 850C, 850D, 855C, 855D

Case Forklifts (584/585/586 Series): 584D, 584E, 585D, 585E, 586D, 586E -- NOTE: NOT compatible on forklift models with Transmission Serial Number above 16249202.

Case IH Tractors: 260, 290, 4494, 4694, 4894

Replaces Part Number(s):

A51976, A50557, A62483, G109413, 3186482M91

Aftermarket Interchange Numbers

127445, 1348800C1, G109412, 2226169, A148562

New aftermarket replacement part - not remanufactured, not used.